any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft? control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all sanyo products described or contained herein. p-channel silicon mosfet ultrahigh-speed switching applications ordering number:enn6420 2SJ340 sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan 80700ts (koto) ta-2165 no.6420C1/4 10.2 20.9 11.5 9.4 0.8 1.6 1.2 0.9 11.0 8.8 4.5 1.3 0.4 2.55 2.55 2.7 123 10.2 1.2 2.55 2.55 2.55 2.55 4.5 0 to 0.3 0.4 1.3 9.9 3.0 2.7 1.35 8.8 1.4 1.5max 0.8 0.8 123 package dimensions unit:mm 2093a [2SJ340] features low on-resistance. ultrahigh-speed switching. 4v drive. enables simplified fabrication, high-density mount- ing, and miniaturization in end products due to the surface mountable package. unit:mm 2090a [2SJ340] 1 : gate 2 : drain 3 : source sanyo : smp 1 : gate 2 : drain 3 : source sanyo : smp-fd
2SJ340 no.6420C2/4 r e t e m a r a pl o b m y ss n o i t i d n o cs g n i t a rt i n u e g a t l o v e c r u o s - o t - n i a r dv s s d 0 6 Cv e g a t l o v e c r u o s - o t - e t a gv s s g 0 2 v ) c d ( t n e r r u c n i a r di d 0 3 Ca ) e s l u p ( t n e r r u c n i a r di p d w p e l c y c y t u d , s 0 1 % 10 2 1 Ca n o i t a p i s s i d r e w o p e l b a w o l l ap d 5 6 . 1w 0 7w e r u t a r e p m e t l e n n a h ch c t 0 5 1 e r u t a r e p m e t e g a r o t sg t s t 0 5 1 + o t 5 5 C specifications absolute maximum ratings at ta = 25?c ?c ?c electrical characteristics at ta = 25?c r e t e m a r a pl o b m y ss n o i t i d n o c s g n i t a r t i n u n i mp y tx a m e g a t l o v n w o d k a e r b e c r u o s - o t - n i a r dv s s d ) r b ( i d v , a m 1 C = s g 0 =0 6 Cv e g a t l o v n w o d k a e r b e c r u o s - o t - e t a gv s s g ) r b ( i g v , a 0 0 1 = s d 0 =0 2 v t n e r r u c n i a r d e g a t l o v e t a g - o r e zi s s d v s d v , v 0 6 C = s g 0 =0 0 1 Ca t n e r r u c e g a k a e l e c r u o s - o t - e t a gi s s g v s g v , v 6 1 = s d 0 =0 1 a e g a t l o v f f o t u cv s g ) f f o (v s d i , v 0 1 C = d a m 1 C =0 . 1 C0 . 2 Cv e c n a t t i m d a r e f s n a r t d r a w r o f| s f y |v s d i , v 0 1 C = d a 5 1 C =5 15 2s e c n a t s i s e r e t a t s - n o e c r u o s - o t - n i a r d c i t a t s r s d 1 ) n o (i d v , a 5 1 C = s g v 0 1 C =0 30 4m w r s d 2 ) n o (i d v , a 5 1 C = s g v 4 C =0 45 5m w e c n a t i c a p a c t u p n is s i cv s d z h m 1 = f , v 0 2 C =0 0 8 3f p e c n a t i c a p a c t u p t u os s o cv s d z h m 1 = f , v 0 2 C =0 0 2 1f p e c n a t i c a p a c r e f s n a r t e s r e v e rs s r cv s d z h m 1 = f , v 0 2 C =0 0 3f p e m i t y a l e d n o - n r u tt ) n o ( d t i u c r i c t s e t d e i f i c e p s e e s0 3s n e m i t e s i rt r t i u c r i c t s e t d e i f i c e p s e e s0 5 1s n e m i t y a l e d f f o - n r u tt ) f f o ( d t i u c r i c t s e t d e i f i c e p s e e s0 5 4s n e m i t l l a ft f t i u c r i c t s e t d e i f i c e p s e e s0 2 2s n e g a t l o v d r a w r o f e d o i dv d s i s v , a 0 3 C = s g 0 =0 . 1 C5 . 1 Cv pw=10 s d.c. 1% 0v --10v v in p. g 50 g s i d =--15a r l =2 v dd =--30v v out v in d 2SJ340 tc=25?c marking:j304 switching time test circuit
2SJ340 no.6420C3/4 0 r ds (on) -- v gs 60 40 20 10 30 50 70 80 0 -- 8 --2 --12 --14 --6 --10 -- 4 tc=--25 c 25 c 75 c v ds =--10v ? y fs ? -- i d 5 10 100 2 5 7 7 2 3 3 1.0 -- 1 . 0 2 3 3 3 5 77 --10 --100 25 57 tc=--25 c 75 c 0 i d -- v gs -- 5 0 -- 4 0 -- 3 0 -- 2 0 -- 1 0 0 0 -- 2 -- 1 -- 3 -- 5 -- 6 -- 4 v ds =--10v 0 i d -- v ds -- 5 0 -- 4 0 -- 3 0 -- 2 0 -- 1 0 -- 2 -- 4 -- 8 -- 1 0 -- 6 v gs =--5.0v --4.0v --4.5v --3.5v --3.0v --2.5v 25 c it00699 it00700 it00701 it00702 tc=25 c i d =--15a drain current, i d ? drain-to-source voltage, v ds ? drain current, i d ? gate-to-source voltage, v gs ? forward transfer admittance, | y fs| s drain current, i d a gate-to-source voltage, v gs ? static drain-to-source on-state resistance, r ds (on) ? w a s o -- 1 . 0 2 3 3 5 5 -- 1 0 2 5 7 7 7 --100 2 -- 1 . 0 23 3 5 5 7 77 --100 -- 1 0 25 ciss coss crss f=1mhz 0 ciss, coss, crss -- v ds 5 5 1000 2 2 5 3 3 10000 100 2 7 7 7 -- 1 0 -- 1 5 -- 2 0 -- 2 5 -- 3 0 -- 5 -- 8 0 r ds (on) -- tc 80 -- 4 0 160 40 120 0 t d (off) t d (on) t f t r v dd =--30v v gs =--10v sw time -- i d 5 1000 100 2 2 5 7 7 2 3 3 10 -- 1 . 0 2 3 33 5 -- 1 0 25 5 77 it00703 it00704 it00705 it00706 80 60 40 20 30 50 70 10 0 i d =--15a, v gs =--4v i d =--15a, v gs =--10v 10 s 100 s 1ms 10ms 100ms i dp =--120a <10 s dc operation operation in this area is limited by r ds (on). i d =--30a ciss, coss, crss pf drain-to-source voltage, v ds ? switching time, sw time ns drain current, i d ? drain current ,i d ? drain-to-source voltage, v ds ? static drain-to-source on-state resistance, r ds (on) ? w case temperature, tc ?c tc=25 c single pulse
specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of august, 2000. specifications and information herein are subject to change without notice. 2SJ340 ps no.6420C4/4 2.0 1.6 1.65 1.2 0.8 0.4 0 0 20 40 60 80 100 120 140 160 p d -- ta 50 40 60 70 80 30 20 10 0 0 20 40 60 80 100 120 140 160 p d -- tc it00709 it00708 allowable power dissipation, p d ? ambient temperature, ta ?c allowable power dissipation, p d ? case temperature, tc ?c no heat sink
|
